
Do you want to know about some of the best chevy 350 intake manifolds? Then you are in the right place.
In this article, we are going to show you the details about some of the basic but useful features, key features, advantages, and maybe some disadvantages of the top 5 products out there. Some buying tips are also included to give you the ultimate clearance.
Let’s get right into the details to know more about it.
Quick Navigation
- 1 What Is Intake Manifold for Chevy 350 And Why Is It Used?
- 2 Best Intake Manifold for Chevy 350: Reviewed in Detail
- 3 1. Speedmaster 1-147-035 Fits Chevy SBC 350 Intake Manifold Machine
- 4 Key Features
- 5 Pros
- 6 Cons
- 7 2. Edelbrock 2040 Performer EPS Intake Manifold Installation Kit
- 8 Key Features
- 9 Pros
- 10 Cons
- 11 3. TYFYB Aluminum Satin Intake Manifold
- 12 Key Features
- 13 Pros
- 14 Cons
- 15 4. JEGS Small Block Chevy 1955-1986 Intake Manifold
- 16 Key Features
- 17 Pros
- 18 Cons
- 19 5. Assault Racing Products PC2026 Small Block Chevy Dual Plane Air Gap Satin Aluminum Intake
- 20 Key Features
- 21 Pros
- 22 Cons
- 23 How to Choose the Best Intake Manifold for Chevy 350 (Buying Guides)
- 24 Type
- 25 Size
- 26 Dimensions
- 27 How to Install Intake Manifold Gasket Chevy 350?
- 28 Step 1: Place The Drain Pan Under The Radiator Drain And Loosen Up The Clamp
- 29 Step 2: Disconnect The Throttle Linkage And Pull off The PCV Valve Hose
- 30 Step 3: Remove The Distributor Cap And Do The Marking
- 31 Step 4: Disconnect The Wires
- 32 Step 5: Remove The Manifold Gasket
- 33 Step 6: Install The Intake Manifold
- 34 Step 7: Tighten The Bolts
- 35 Frequently Asked Questions (FAQs)
- 36 Do intake manifolds increase horsepower?
- 37 How much is a performance intake manifold?
- 38 What are the two types of intake manifolds?
- 39 How much is it to fix an exhaust manifold?
- 40 Wrap Up
What Is Intake Manifold for Chevy 350 And Why Is It Used?
The intake manifold gasket is for your vehicle. This is a tool that is placed between the engine and the intake manifold. It is what your car relies on to keep the motion as smooth as possible. To get a better understanding of the gasket and other functions, first, you should examine its job.
If you find any vehicle that has an internal combustion engine, you should know that the manifold can sit well on top of the engine. It helps well to run the function properly. Its design is perfect for any car to run smoothly.
Besides, It can run on air-mixed fuel, three times components, combustion, and spark. The internal components rely upon the manifold because it helps the vehicle to breathe.
Intake manifolds are good equipment to cool down the cylinders. It has a series of tubes that ensures that the air is distributed evenly to all the cylinder heads.
To do that, the intake manifold works pretty well. It also has a coolant that runs through the manifold. That helps to absorb the heat and reduce the temps. And as it helps to cool down the engine, it prevents the engine from overheating.
Best Intake Manifold for Chevy 350: Reviewed in Detail
There are a bunch of good-quality intake manifolds available out there. Check out what types are there and what type you need for your vehicle. Let’s see the top 5 products in detail.
1. Speedmaster 1-147-035 Fits Chevy SBC 350 Intake Manifold Machine
This Speedmaster small chevy intake manifold has many features that can be useful for your vehicle. This 147 aluminum intake can create distinctive and unique DNA elements inspired by some old and new technologies. You can say this is the blend of the old and the new.
It is also a carbureted manifold machine with a workforce that drives product innovation to ensure its quality. Besides, the manifold gasket is track-proven. It can survive the longevity of the road. Recreation is compulsory, and it can do things well as if it is a track-proven product. And it can be a suitable choice when it comes to choosing the best intake manifold for Chevy 350.
Key Features
- Part Types are intake manifolds and carbureted
- Single plane intake style
- Carburetor quantity is one
- The height is 6.060 in.
- The basic operating RPM range is 3,000-7,500
- Machined-polished intake finish
- Made of aluminum
- Has CFM Calculator
- No EGR
- Engine block style is Stock/OEM standard deck
Pros
- Creates unique & distinctive DNA items inspired by the blend of old and new technology
- Track proven
- Has versatility
Cons
- It may require an adapter or converter for use outside of the US
2. Edelbrock 2040 Performer EPS Intake Manifold Installation Kit
This manifold installation or Edelbrock intake has everything you need. It is precision built, which makes it a perfect fit for most vehicles. The weight is also not so heavy. So, you will face less trouble with it.
The Edelbrock performer intake manifold is versatile. It is a good-quality engine intake manifold that has a nice finish. The low-end torch is also a thing that brings beneficial effects on it. This Edelbrock intake manifold and chevy 350 make a perfect combo.
If you have a square bore carb and are planning to do an SBC intake swap, this intake manifold Edelbrock has everything you need. You just cannot get the plugs for the intake. This is the only thing you need to purchase individually. Edelbrock performer intake manifolds are one of the best because of these reasons.
Key Features
- Edelbrock manufacturer
- 16.75 pounds of weight
- Satin exterior
- Package Dimensions are 22.86 h x 66.04 l x 36.195 w (centimeters)
- Fit type is vehicle specific
Pros
- Versatile
- Precision-built
- Perfect fit and nice finish
Cons
- It doesn’t have the plugs for the engine intake
3. TYFYB Aluminum Satin Intake Manifold
This TYFYB performer intake manifold is a good product to use for your vehicle. You can get it completely new with a 180° street manifold. It is designed in such a way that you can use Carter AFB, Holley, and Edelbrock square flange carbs. This intake manifold engine has a power range between 1500-6500 RPM.
Moreover, this manifold from TYFYB helps to enhance RPM potential and supports bigger engines. This performer intake is power comparable to single-plane manifolds. It helps to retain the driveability of a dual-plane intake manifold. It is highly recommended because of its professional installation process.
Besides, it has an intake gasket that is 1.23” wide x 1.99” tall with portholes. You can do an intake test to be sure about its capability. It fits 1957-86 SBC Chevy engine applications. This package includes a 1 X Aluminum Intake Manifold with all of these features.
Key Features
- 17.6 pounds of weight
- Product Dimensions is 22.44 x 10.63 x 5.51 inches
- The exterior is a satin finish
- Made of aluminum
- Fits 1957-86 SBC Chevy engine applications
- The carburetor Flange Type is a 4-Barrel Square Bore
- Power range is 1500-6500 RPM
- Special Feature RPM Range is 1,500-6,500
Pros
- Fits perfectly into chevy engines
- The satin finish helps to run smoothly
- Highly recommend using this product if you want to convert your TBI to a carb.
- Good quality for the price
Cons
- Doesn’t fit under the hood of the Corvette
4. JEGS Small Block Chevy 1955-1986 Intake Manifold
The JEGS intake manifold has many features to look at if you want the best intake manifold for Chevy 350. It is designed to fit with all the popular aftermarket square bore 4150 carburetors, such as Holley, Proform, Edelbrock, Quickfuel, and more. The improved engine performance and the horsepower are amazing. Besides, It makes the product better than others.
In addition, It is also considered as the higher flowing intake manifold compared to any stock cast iron intake. It can also fit Chevrolet and GM cylinder heads from 1955 to 1986.
Further, it is idle to 5500 RPM powerband to use in streets or mild race applications. The material is also fabricated from cast aluminum. It helps to save weight and improve performance as well. These are the things that make it unique and more advanced than the others.
The material is also fabricated from cast aluminum. It helps to save weight and improve performance as well. These are the things that make it unique and more advanced than the others.
Key Features
- Made under JEGS manufacturer
- 15 pounds of weight
- Dimensions is 21.7 x 12 x 5.6 inches
Pros
- Improved engine performance
- Fits well with popular carburetors
Cons
- Some of the holes may not be exactly in the correct place
5. Assault Racing Products PC2026 Small Block Chevy Dual Plane Air Gap Satin Aluminum Intake
This satin finish aluminum intake has a 180° dual plane high rise design. It brings outstanding power from 1500 to 6500 RPM. This is designed in a Square bore carb bolt pattern for Holley 4150/4160 style carburetor. That makes it ideal. This is also an ideal product for the port position. It allows custom porting to provide maximum power.
Besides, this is also considered an air intake because it has an open-air gap under the plenum to cool down the fuel charge. There is also a cast-in boss on intake runners that helps to use nitrous injections. Also, the dual distributor hold-down provisions ensure protection against the rotation of the distributor.
This product accepts air-conditioning, late-model water necks, HEI brackets, and alternators to work better. The four water outlets are also a great feature. However, there can be some trouble you may face. There can be a leak intake manifold because of having a leakage.
And it happens when one side of it is lined-up properly and the other side is not. In this case, you may need to replace the intake manifold. But in a general sense, this is a good product on a low budget.
Key Features
- Made under Assault Racing Products manufacturer
- Product Grade is Performance Part
- Custom-fit
- 18.21 pounds of weight
- Square in shape
- The manifold Height is 4.65 inches
- Made of aluminum, and alloy steel
- RPM range is 1500 – 5500
Pros
- Has an open-air gap to provide a cooler fuel charge
- Affordable
- allows custom porting for maximum power
- Provide air conditioning
Cons
- One side is pretty well lined up, but the ports on the other side are all staggered from the proper position
How to Choose the Best Intake Manifold for Chevy 350 (Buying Guides)
There are some things you need to know when you are going to buy an intake manifold for chevy 350. See what these are.
Type
Getting the right type of intake manifold is mandatory as there are a bunch of them. You need different types of manifolds with different vehicles. The RPM they offer is where they differ. You have to make sure what type of manifold you choose. If you choose the latter rather than the former, then you need to pay for the extra features.
Size
Size matters in this case. You have to choose the right size of the intake that fits well with the application. You should look at the cylinder head port design, hood clearance, carburetor body mounting, and all these things.
Make sure you measure the manifold to be sure about its size. And ensure that the ports for the intake runners can fit perfectly with the cylinder heads.
Dimensions
When you choose any product, you have to look at the model and ensure that you are completely aware of the specifications of that particular product. You can also look at the dart intake or dart intake manifold as it has some great features.
How to Install Intake Manifold Gasket Chevy 350?
There is a certain method of installing an intake manifold gasket chevy 350. Let’s see what the method is and what things you need to be careful about step-by-step.
Step 1: Place The Drain Pan Under The Radiator Drain And Loosen Up The Clamp
First, you need to open the drain to place the drain pan under the radiator drain. Once you are done doing that, close the drain. Now, remove the air cleaner and make the hose clamp lose with the help of a screwdriver to pull off the hose.
After that, you need to remove the alternator support bracket to disconnect the fuel line. If you see it has a spring lock, and it is fuel-injected, the spring lock tool will do the work of loosening it.
Step 2: Disconnect The Throttle Linkage And Pull off The PCV Valve Hose
The next step is to disconnect the throttle linkage from the throttle body. If you can see any throttle valve cable, you need to disconnect it too. After that, you should loosen the clamp on the vacuum hose.
Now, you should pull off the PCV valve hose if there is any. It may be attached to the throttle body or the carburetor. Also, check if you find any coolant temperature sensors. Check the front part of the driver’s side of the manifold. If you find any, you need to pull off the electrical plug.
Step 3: Remove The Distributor Cap And Do The Marking
Try to use a piece of tape to place it directly under the cylinder spark plug wire that you can find on the distributor cap. For that, you need to follow each spark plug wire that is located on the passenger side of the engine. Pull that out of the distributor and remove the cap.
Once you are done with that, now you need to mark the distributor direction rotor. Make another mark on the distributor shaft and the other corresponding mark in front of the mark that is on the intake manifold.
Step 4: Disconnect The Wires
Disconnect the vacuum hose from the distributor by loosening the hold-down clamp. Disconnect the electrical wire of the distributor as well. But if you cannot find that, you can disconnect it from the negative terminal of the coil.
This is how you need to lift the distributor and make them keep it aside. After that, remove all the bolts of the intake manifold and pry the intake manifold up in front of the manifold.
Step 5: Remove The Manifold Gasket
Now, it’s time to remove the manifold gasket. And to do that, first, remove the gasket that is near the rear of the lifter gallery. Scrape off all the excess gasket material so that the center span and the head surface become clean. If the heads are made of aluminum, you should be careful about scratching the heads.
Step 6: Install The Intake Manifold
Install the gasket by ensuring that they are properly aligned over the holes. Pick the intake manifold up and hold it carefully on the gasket. Place it carefully so that it fits in the right place.
Step 7: Tighten The Bolts
Now, tighten all the bolts that you have to loosen before. Install the distributor, then the manifold. This is the process you need to follow.
Frequently Asked Questions (FAQs)
Do intake manifolds increase horsepower?
If you add an aftermarket performance intake manifold, it helps to increase the horsepower output.
How much is a performance intake manifold?
If you don’t want a bad intake manifold then you have to spend a decent amount of money on it. The cost of the intake manifold is from $100 and $500 for individual parts. The labor will cost from $340 to $420, depending on the time and area of installation.
What are the two types of intake manifolds?
There are two basic intake manifolds: a single-plane intake and a dual-plane intake.
How much is it to fix an exhaust manifold?
If you want to fix an exhaust manifold with exhaust gas, you need to spend around $80 to $90 per hour. So, the labor cost will be around $160 and $270.
Wrap Up
Now that you know all about the best intake manifold for the chevy 350, you can decide what you should do. If you want to purchase this product, make sure you check if it goes well with your vehicle or not.
In this article, we have shared with you the basic information that you need. Check all of these things about the best intake manifold gasket for chevy 350, then buy your preferable one.
Get yours ASAP!
Leave a Reply